OB02032
With the same sleek, modern style and vastly improved performance, the Matrix wood burning stove will certainly bring a European touch to your home. Let the Matrix wood stove provided you the warmth, safety and coziness needed during these cold winters
You can now personalize your device with the steel or soapstone top and side panel options from a local Quebec City mine, reminding us of the richness of our natural resources. Logs will easily fit under the large firebox, making the Matrix a practical and stylish heater. The Matrix is equipped with a 130 CFM fan to ensure optimal heat distribution. Enjoy the comfort of winter more than ever before!
Required to complete the wood stove:
(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3) As measured per CSA B415.1-10 stack loss method.
(4) Higher Heating Value of the fuel.
(5) Lower Heating Value of the fuel.
(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7) Optimum overall efficiency at a specific burn rate (LHV).
(8) This appliance is officially tested and certified by an independent agency.
(9) Carbon monoxyde
| Combustion technology | Non-catalytic |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Maximum log length | 20" |
| Log positioning | Over width |
| Chimney diameter | 6" |
| Flue outlet diameter | 6" |
| Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
| Minimum chimney height (feet) | 12' |
| Baffle type | C-Cast |
| Approved for an alcove installation | Yes |
| Approved for a mobile home installation | Yes, with fresh air intake |
| Shipping Weight | 506 lb. (230 kg) |
| Door type | Single, glass with cast iron frame |
| Glass type | Ceramic glass |
| Glass surface – dimensions (Width X Height) | 19 5/8" x 11 7/8" |
| Glass air-wash system | Yes |
| Premium quality blower included (CFM) | 130 |
| Overall dimension (Height) | 36 7/8" |
| Overall dimension (Width) | 27 1/8" |
| Overall dimension (Depth) | 25" |
| Door opening – dimension (Height) | 8 3/4" |
| Door opening - dimension (Width) | 17 1/2" |
| Firebox – dimension (Height) | 11 7/8" |
| Firebox – dimension (Width) | 21" |
| Firebox – dimension (Depth) | 16 1/2" |
| Firebox lined with refractory bricks for better heat distribution | Yes |
| Stainless-steel secondary-air system improving gas combustion | Yes |
| Model | Pedestal |
| Steel thickness – body | 3/16" |
| Steel thickness – top | 5/16" |
| USA standard (emissions) | EPA |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA standard (safety) | UL 1482, UL 737 |
| Canadian standard (safety) | ULC-S627 |
| Tested and listed as per applicable standards | By an accredited laboratory (CAN/USA) |
| Warranty | Limited lifetime |
|
Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm) |
||||
| Canada | United-States | |||
| Single wall pipe | Double wall pipe | Single wall pipe | Double wall pipe | |
| Clearance – back wall | 14 1/2" | 6" | 11" | 6" |
| Clearance - corner | 10" | 7" | 10" | 7" |
| Clearance – side wall | 17" | 17" | 16" | 16" |
| Clearance – top (measured from the platform on which the appliance is installed)** | 84" | 84" | 84" | 84" |
| Clearance – minimum floor protection in front of the appliance | 18" | 16" | ||
|
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites). |
||||
|
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual. |
||||
|
BTU |
75,000 BTU |
|
Heating Capacity |
500-2,100 sq. ft. |
|
Firebox Size |
2.4 cu ft. |
|
Log Length |
up to 20” |
|
Flue Pipe Diameter |
6” |
|
Weight |
506 lbs. |
|
Width |
27 ⅛” |
|
Depth - Overall |
25 ⅝” |
|
Height |
36 ⅞” |
|
Mobile Home Approved |
Yes* |
* with optional AC02090
Reversible door (Hinged on left or right)
• Easy-to-access ash pan with safety lid
• Air-wash system
• Heavy duty cast iron door and cast iron
door overlay
• Ultra-quiet crossflow blower with variable
speed control and thermodisc
included
• Fresh Air Intake included
|
Matrix Wood Stove with Black Side Steel Panel Kit and Black Top Steel Panel Kit |
|
|
Matrix Wood Stove with Black Side Steel Panel Kit and Soap Stone Top Panel Kit |
|
|
Matrix Wood Stove with Soap Stone Side Steel Panel Kit and Black Top Steel Panel Kit |
|
|
Matrix Wood Stove with Soap Stone Side Steel Panel Kit and Soap Stone Top Panel Kit |
|
*NOTE: Shown with required decorative side panel and louver or triver(not included). The decorative side panel and louver or triver must be purchased to complete this unit.
|
5" Air Intake Termination with Clamps --- contains two pipe clamps and one outside wall termination |
 |
|
5" X 4' Insulated Flex Pipe for Fresh Air Intake Kit --- fits on fresh air kit adaptor |
 |
|
5'' Fresh Air Intake Register with Airtight Damper --- allows outside combustion air to feed the appliance |
 |
|
Glass Hearth Pad 10 mm - 54" X 46 3/4" --- tempered for resistance to thermal and impact shocks |
 |
|
Rigid Firescreen --- easy to remove screen allows door to be opened for fire viewing |
 |
|
Adhesives, Gaskets and Insulation
|
|
Paint
|
|
Maintenance Products
|
|
Fire Starters
|
|
Hearth Pads
|
|
Heat Shields
|
