FDV451N
The FDV451 Free Standing Direct Vent Gas Stove Model provides sealed combustion where it draws outside air for combustion. This model can be vented either horizontally or vertically.
The Kingsman FDV451 direct vent gas stove could be a safe and efficient appliance to heat your home. Conveniently fueled by either natural gas or propane and with dozens of possible style options and customizations available, this unit is certain to delight visually and conceptually. This unit can be vented either horizontally or vertically for ease of placement in any room of your home. it's mobile home approved also as approved for installation in bedrooms.
The Kingsman Free Standing Direct Vent gas stove with Millivolt and IPI Control is a fantastic modern and sleek-looking stove choice for your home. With a reliable standing pilot valve allowing operation during power outages and therefore the ability to pair with a full line of remotes or wall switches, this stove could be a star. Additionally, with a multitude of options in both finishes and doors, also as your choice of traditional oak logs or contemporary glass media, This stove's compact chassis design can fit into a variety of installations, and it comes with safety barrier screens to assist protect your loved ones from contact with hot surfaces.
Direct Vent gas stoves are heating workhorses. They feature a combustion system that utilizes the venting to not only exhaust but to bring in fresh air for combustion. These systems can act as full-time heaters when sized appropriately. Not only are they functional but they're decorative also. Direct Vent appliances have a number of the foremost realistic-looking log fires. With contemporary alternatives available, you'll match your home's style.
Kingsman Free Standing Direct Vent Gas Stove also available in FDV200S and FDV350 Models.
*Note: Components may have to be ordered separately to create a complete unit.
*Venting Requirements: This unit requires a venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section for available venting pipe and other venting components that must be used with this unit.
| Model |
FDV451LP/LPE/LPE2 |
FDV451N/NE/NE2 |
| Fuel | Propane | Natural |
| Flue | Top |
Top |
| Gas Control | Millivolt / IPI | Millivolt / IPI |
| Input Max. | 31,000 BTU |
34,500 BTU |
| Input Min. | 24,500 BTU |
23,750 BTU |
| FE (p.4.1-02)% | 72.14% / 74.06% |
65.89% / 67.72% |
|
Flue Sizes |
4/7" |
4/7" |
|
Glass Size |
21 3/8" W x 19 7/16" H |
27 1/8"W x 33 1/2"H x 20 5/16"D |
| Glass Type | Single | Ceramic |
| Size (WxHxD) |
27 1/8"W x 33 1/2"H x 20 5/16"D |
27 1/8"W x 33 1/2"H x 20 5/16"D |
| Viewing Area |
20" W x 16 5/16" H |
20" W x 16 5/16" H |
| Venting | 4/7" Flex or 4 x 6 5/8 Hard Pipe* |
4/7" Flex or 4 x 6 5/8 Hard Pipe* |
| Electronic Ignition |
Yes | Yes |
| Certification | Heater | Heater |
| Bedroom Approved |
Yes | Yes |
CA Residents: See Prop 65 WARNING
Log Grate
 |
Log Grate (F45LG) The Kingsman Decorative Log Grate for the FDV451 Series Stoves is a beautiful accessory for your free-standing gas stove. This Kingsman log grate has been explicitly designed to figure with the LOGF451 log assemblies and would supply a wonderful base for your log set. This Kingsman Decorative Log Grate has steel tines to create sure that it can withstand many years of use under brilliant fires, allowing you to not have to worry about the stability of your log set.
|
Log Set or Media
 |
Oak Log Set (LOGF451) The Kingsman Oak Log Set for FDV451 Series Gas Stoves is an exquisitely detailed log set for your free-standing stove. These highly detailed logs are made up of a durable ceramic fiber that can withstand many years of use.
|
 |
Bronze Glass Media (Z5GC) If your fireplace can equip a glass media tray, then you'll enjoy the looks of this high luster Kingsman Half-Inch Bronze Glass Media. With the bronze color, this glass media will provide an upscale and earthy-toned base to your roaring fire. This Bronze Glass Media will catch the glint of the flames, throwing unusual patterns everywhere in your room.
Note: Maximum Glass Required 15 lbs |
 |
Assorted Cannonball Fire Art (RBCB1)
|
Conversion Kit
|
|
Conversion Kit to Propane Millivolt (450DV-CKLP)
Conversion Kit to Natural Gas Millivolt (450DV-CKNG)
Conversion Kit to Propane Proflame 1 (450DV-CKLPI)
Conversion Kit to Natural Gas Proflame 1 (450DV-CKNGI)
Conversion Kit to Propane Proflame 2 (450DV-CKLP2)
Conversion Kit to Natural Gas Proflame 2 (450DV-CKNG2)
|
Front Door and Vent Lid
|
Door Front and Vent Lid (F450FBL/F450FSS) This Kingsman Stove Door Front and Vent Lid with Safety Screen for the FDV451 Series Stoves is that the final touch your stove needs. This door front will complete the front appearance of your FDV451 Series Stove, and therefore the included safety screen grants an additional layer of safety against accidental burns. This door will give your free-standing stove installation an additional touch of timeless elegance.
|
Side Doors
|
Solid Panel Stove Side Doors (F451SDSBL/F451SDSSS) The Kingsman Solid Panel Stove Side Doors for FDV451 Series Free Standing Direct Vent Gas Stoves will complete the sides of your FDV451 installation and provides your home the aesthetic of a side-loading wood-burning stove. These doors are solid center door panels and are needed to finish the FDV451 series stoves. Your stove can readily be designed to figure well together with your home's existing design themes.
|
Fan Kit
 |
Speed Control Temperature Sensing Fan Kit (F45FK) This Kingsman Variable Speed Temperature Sensing Fan Kit is a handy addition to your free-standing stove. With the thermal switch control, this fan can automatically turn itself on and off in reaction to the heat levels of your living space.
|
Liner Kit
 |
Traditional Brick Liner (F451RLT)
|
 |
Herringbone Brick Liner (F451RLH)
|
 |
3 Piece Porcelain Reflective Liner Kit (F451PL)
|
B-Vent Converter
|
4/7" Direct Vent to 4" B-Vent Converter (F35BVC) Place a bead of Black Mil Pac sealant around a 4-inch flue collar on the stove. Position Safety Spill Switch wires to the rear of the stove and Lower B-Vent Converter onto the 4 and 7-inch collars until fully seated.
*Venting Requirements: This unit requires venting pipe with an inner diameter of 3 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. |
Thermostat
 |
Wall Mount Thermostat- For Millivolt Units (Z2MT)
Programmable Digital Wall Mount Thermostat- For Millivolt Units (Z80PT)
|
 |
On/Off Remote Control for Millivolt/IPI Units (GFRC)
|
 |
Thermostat Remote Control Millivolt/IPI Units (GTRC, EGTRC)
|
|
|
Thermostat On/Off modulating for Natural Gas/Propane Millivolt/IPI Units
|
|
Thermostat On/Off modulating and fan control for Natural Gas/Propane Millivolt/IPI Units (GTFRCN, GTFRCP, EGTFRCN, EGTFRCP)
|
| Dura-Vent Stove Adapter - ZDVDKA | |
 |
Dura-vent stove adapter is used specifically with direct vent stoves and allows the ventilation to exceed expectations when comparing them to other vents. |
| 45-Degree DirectVent Pro Elbow - 46DVA-E45, 46DVA-E45B | |
 |
Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 45°. Finish: Galvanized & Black. |
|
90-Degree DirectVent Pro Elbow - 46DVA-E90B, 46DVA-E90 |
|
 |
Use to offset obstructions as needed. Fully unitized, twist-lock construction. Elbows swivel, allowing the lock to remain fully engaged while aligning to the desired direction. The angle will remain fixed at 90°. Finish: Galvanized & Black. |
| 4"x6.625" DirectVent Pro Pipe Length | |
|
|
Features a fully unitized twist-lock construction in both 4” x 6 5⁄8” and 5” x 8” vent sizes. Use of sealant is optional unless specified by the appliance manufacturer. Finish: Galvanized & Black. |
| 4"x6.625" DirectVent Pro Pipe Extension | |
|
|
Use to add length to a straight length of DirectVent Pro. 8 ½” pipe adds 3”- 7” of length, 16” pipe adds 3”- 14 ½” of length when used with rigid sections of pipe. Direct vent lengths feature a fully unitized, twist-lock construction. Available in black or galvalume exterior. |
| 4"x6.625" DirectVent Pro Adjustable Pipe | |
|
|
Use of sealant is optional unless specified by the appliance manufacturer. Available in black or galvalume exterior. |
| DirectVent Pro Wall Strap - 46DVA-WS | |
 |
Use to support vent pipe. Provides 1” clearance. Recommend installing Wall Straps at 4-foot intervals on vertical runs. |
| DirectVent Pro Ceiling Firestop - 46DVA-FS | |
 |
Required for multi-story vertical installations on the second floor and any subsequent floors. |
|
DirectVent Pro Decorative Cover - 46DVA-DC |
|
 |
Use as a decorative cover for horizontal (through-wall) installations Fits over the Wall Thimble faceplate. Also used to cover a Ceiling Support Box. |
| 14" DirectVent Pro Cathedral Ceiling Support Box - 46DVA-CS | |
 |
Use to pass through ceiling and support pipe. May be used on vaulted or flat ceilings. Painted black. Trim and clamp included. |
| DirectVent Pro Adjustable Roof Flashing - 46DVA-F6 | |
 |
Use to weatherproof the penetration of vent pipe through the roof. Select roof flashing based on pitch of the roof. For pitches of 0/12 - 6/12. Storm Collar required. Made of galvalume. |
| DirectVent Pro Steep Roof Flashing - 46DVA-F12 | |
 |
Use to weatherproof the penetration of vent pipe through the roof. Storm Collar required. Made of galvalume. |
| DirectVent Pro Dead Soft Aluminum Flashings - 46DVA-F6DS | |
 |
Available in sizes 4”x 6 5⁄8” and 5”x 8”, in 0/12-6/12 (shown) and 7/12-12/12 styles. Made of malleable dead soft aluminum. Use with metal or tile roofs. |
| DirectVent Pro Storm Collar - 46DVA-SC | |
 |
Use to maintain a weather tight resistant seal between the pipe and the flashing. |
| DirectVent Pro High-Wind Termination Cap - 46DVA-VCH | |
 |
Available in aluminum. Use for vertical terminations only. For vertical terminations only. Provides improved performance in high wind conditions. |
| DirectVent Pro Low-Profile Termination Cap - 46DVA-VC | |
 |
Available in aluminum and stainless steel (S). Use for vertical terminations only. Check the appliance manufacturer’s instructions to determine which caps are approved for use with their appliance. |
| DirectVent Pro Wall Thimble - 46DVA-WT | |
 |
Use with Square Horizontal Cap only. Provides a complete wall-pass-through and firestop. Refer to the appliance manufacturer’s installation instructions for requirements. |
| DirectVent Pro Square Horizontal Termination Cap - 46DVA-HC | |
 |
Use for standard and high-wind through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations. Available in aluminum, stainless steel (S), and copper (C). |
| DirectVent Pro Round Horizontal Termination Cap - 46DVA-HRCS | |
 |
Use for through-the-wall termination. Check installation instructions for restrictions on horizontal cap terminations. Finish: aluminum. |
| DirectVent Pro Vinyl Sliding Standoff - 46DVA-VSS |
|
 |
Use as a heat shield on structures with vinyl siding, or other temperature-sensitive materials, to help prevent warping and or melting of the material. |
