Osburn Volta EPA Pellet Stove

Estimated Arrival: Between and . (To All Contiguous States)

✔ Same-Day Order Processing
✔ Free Returns
✔ No Restocking Fees
✔ Financing Options Available

Text or call 888-992-1556, start live chat, or email with any questions. Our team is available to serve you 8:00 AM - 11:59 PM ET, 7 days a week.

Osburn products are made to order. The estimated lead time is 12-18 weeks.


The Volta, Osburn’s newest pellet stove, is a quiet and contemporary model. Its innovative components use direct current (DC) and can now operate using the optional 24 volt battery system in the event of a power interruption. The unit can also be easily connected to solar panels or other secondary source of renewable energy.

The Volta is the complete package, an environmentally friendly heater that delivers power, efficiency, reliability and cleanliness..

        Appliance Performance 
        Fuel type : Pellet (Premium grade or better) (2)
        Recommended heating area-ft² : () 500 - 2,000
        Hopper capacity : 60 lb (27 kg)
        Maximum burn time : () 50 h
        Maximum heat input rate : (3) 45,600 BTU/h (13.4 kW)
        Overall heat output rate < : (4) 7,200 BTU/h (2.1 kW) to 24,800 BTU/h (7.3 kW)
        Average overall efficiency : (5) 62.8 % (HHV) (6) 67.7 % (LHV) (7)
        Optimum efficiency : (8) (9) 75 %
        Burn rate : 1.2 - 5.3 lb/h
        Average particulate emissions rate : (10) 2.5 g/h
        Average CO : (11) 111.8 g/h
        Average electrical power consumption for ignition cycle : (12) 1.6A (192W)
        Average electrical power consumption for continuous operation : (12) 0.3 - 0.6A (36 - 72W)

        (1) Values are as measured per CSA B415.1-10, except for the recommended heating area, hopper capacity, maximum burn time and maximum heat input rate. Results may vary depending on pellet quality, density, length, and diameter.

        (2) Grades of pellet fuel are determined by organizations such as Pellet Fuels Institute (PFI), ENplus and CANplus.

        (3) Based on the maximum burn-rate and a dry energy value of pellet at 8,600 BTU/lb.

        (4) As measured per CSA B415.1-10 stack loss method.

        (5) Efficiency based on radiated and delivered heat when allowing cycling from high to low burn to simulate thermostat demand.

        (6) Higher Heating Value of the fuel.

        (7) Lower Heating Value of the fuel.

        (8) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

        (9) Optimum overall efficiency at a specific burn rate (LHV).

        (10) This appliance is officially tested and certified by an independent agency.

        (11) Carbon monoxyde.

        (12) Unless stated otherwise, measures were taken directly at the main power source and include all electrical components present in the appliance.

        General Features
        Combustion technology Bottom-feed
        High-efficiency certified appliance CSA B415.1-10
        Electronic igniter Yes
        Automatic or manual adjustment of combustion air supply N.A.
        Chimney diameter N.A.
        Flue outlet diameter 3"
        Type of chimney ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L)
        Baffle type Stainless steel
        Approved for an alcove installation Yes
        Approved for a mobile home installation Yes, with fresh air intake
        Shipping Weight 411 lb (186 kg)
        Door type Single, glass with steel frame
        Glass type Ceramic glass
        Glass surface – dimensions (Width X Height) 5 3/4" X 10"
        Glass air-wash system Yes
        Premium quality blower included (CFM) 220
        Noise level at 6 feet 45 dBa (+/- 3 dBa) - 52 dBa (+/- 3 dBa)
        Overall dimension (Height) 41 1/8"
        Overall dimension (Width) 21 3/4"
        Overall dimension (Depth) 28 1/8"
        Adjustable threaded legs Yes
        Voltage and frequency 88 - 264 VAC (47 - 63 Hz)
        AC Current 3.6A/115VAC - 1.8A/230VAC
        Battery back-up 24V DC (20 Ah)
        Main control board fuses ATC 7.5A 32VDC
        Battery back-up control board fuses ATC 7.5A 32VDC
        Power cord inlet socket fuse 3A / 250V (5 X 20)
        Main board battery CR2032
        Canadian Standard (emissions) CSA B415.1-10
        USA standard (safety) UL 1482, ASTM E1509
        Canadian standard (safety) ULC S627
        Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
        Warranty Limited lifetime
        Minimum clearances to combustibles*
        (Data expressed in inches. 1 inch = 25.4 mm)
          Canada United-States
        Clearance – back wall 1" 1"
        Clearance - corner 1" 1"
        Clearance – side wall 4" 4"
        Clearance – top (measured from the platform on which the appliance is installed)** 54" 54"

        * The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

        ** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.




        Heating Capacity

        500-2,000 sq ft

        Loading Capacity

        60 lbs

        Maximum Combustion Time

        50 hrs

        Flue Pipe Diameter



        411 lbs


        21 ¾” W


        28 1/8” D


        41 ⅛” H


        Click to see options

        2" X 25' Anti-Static Flex Hose

        24v (2 X 12v) Battery Kit

        3" X 10' Insulated Flex Pipe for Fresh Air Intake Kit

        3" X 5' Fresh Air Intake Kit

        Battery Holder Kit

        Digital Wall Thermostat

        --- always displays ambient temperature

        Glass Hearth Pad 10mm - 44" X 36"

        --- Offers a contemporary alternative to traditional hearth boards

        Glass Hearth Pad 10mm - 54" X 46 3/4"

        --- Offers a contemporary alternative to traditional hearth boards

        LCD Touch Screen Sliding System

        Leg Assembly for AC01463 Discharge Tank

        --- Allows for floor-based installation

        Programmable Thermostatic Remote Control

        Stand Alone Auxiliary Discharge Tank

        --- unit contains all the necessary elements to be hung on the wall

        Storage Tank Extension for AC01460

        --- Gives the equivalent to one ton of pellets in total

        Storage Tank with Pneumatic Self-Feeding Pellet System

        --- Allows long heating autonomy for pellet appliances


        Click to see accessories

        Adhesives, Gaskets and Insulation

        High Temperature Red Silicone (300 ml - 10.1 fl.oz.)

        High Temperature Clear Silicone (300 ml - 10.1 fl.oz.)


        Metallic Black Stove Paint – 342g (12oz) Aerosol

        Metallic Black Stove Paint – 85g (3oz) Aerosol

         Maintenance Products

        Stove and Furnace Cement (300ml - 10.1fl.oz.)

        --- helps prevent smoke and air leaks

        Ash Vacuum Cleaner

        --- designed almost exclusively for ash collection

        3'' Pellet Stove Cleaning Kit

        4'' Pellet Stove Cleaning Kit

        5' Pellet Stove Flexible Rod (1/4"-20 Thread)

        Dry Cleaning Pad

        --- easily cleans the soot from glass without water

        Pellet Appliance Glass Cleaner (500 ml - 16.9 fl.oz.)


        Hearth Pads

        Modular Floor Protection System

        --- easy to assemble modular panel construction and simple clip together design requires no fasteners

        Heat Shields

        Certified Modular Heat Shield System Extension

        --- reduces clearances by up to 87.5% which includes mounting support brackets and hardware

        Click HERE to shop for more Accessories.


        Volta EPA Pellet Stove Installation and Operation Manual

        Volta EPA Pellet StoveDimensions