DVD32FP30P
A Direct-Vent system uses two vent pipes. One draws air in from outdoors to support combustion. The other exhausts the by-products of combustion to the outside. The two vent pipes may be concentric (exhaust pipe within a larger diameter intake pipe) or co-linear (separate pipes of about the same size).
Combustion takes place inside a sealed chamber – with a glass front in the case of a fireplace. Room air circulates around the combustion chamber, often assisted by a blower, to heat the room.
A DV system is often installed along an outside wall to simplify the vent run, but can also be installed elsewhere in the home and vented through the roof.
Tahoe Clean-Face Deluxe models feature our Contour tube-style burner, designed to complement the hand-painted ceramic fiber log set, and produce a natural dancing flame.
The Clean-Face Deluxe Fireplace comes with a discreet air distribution channel that eliminates the look of louvers, yet still allows you to operate the optional blower. It features a large tempered glass window that provides an unobstructed view to the log set. Choose an optional liner to customize your fireplace.
Tahoe Clean-Face Deluxe models require 17-3/4, and use 4 x 6-5/8 venting, making them ideal for applications where wall-cavity space is tight.
Designed for in-wall installation, your Tahoe Direct-Vent fireplace can be finished with tile or other non-combustible material, which conceals the outer edge of the fireplace to provide a true built-in appearance.
Tahoe Deluxe models feature our Contour tube-style burner, designed to complement the hand-painted ceramic fiber log set, and produce a natural dancing flame.
The Deluxe Tahoe model has louvers and an available trim kit. The large heat-resistant, tempered glass window provides an unobstructed view to the log set. Tahoe Deluxe offer several styles of liners – Aged Brick, Herringbone, Stacked Limestone, and Black Reflective.
Tahoe Deluxe models require just 16 inches of depth making them ideal for applications where wall-cavity space is tight.
Millivolt: Millivolt models feature a standing pilot that you light at the beginning of each heating season using the pushbutton Piezo igniter. Millivolt systems require no electric or battery backup. The systems work with any of our optional remote control accessories – from simple wall switches to thermostats to hand-held programmable remotes.
IP: Intermittent Pilot models eliminate the standing pilot for even greater energy savings. IP requires 120V AC to operate on a daily basis but can run on battery backup to provide heat during a power outage. IP technology works with any of our remotes.
CA Residents: See Prop 65 WARNING.
 |
Black Reflective Fireplace Floor Panel
|
 |
Herringbone Brick Fireplace Liner
|
 |
Aged Brick Fireplace Liner
|
 |
Stacked Fieldstone Fireplace Liner
|
 |
Variable Speed Blower
|
 |
Conversion Kits
|
|
24 Inch Flexible Stainless Steel Gas Line
|
 |
Platinum Glowing Fireplace Embers
|
 |
Traditional Log and Ember Bed Kit
*This kit is not for use atop a burner. |
|
Fireplace Barrier Screen Color: Matte Black |
|
Door Frame with Barrier Screen
|
 |
Rectangle Door Set
|
 |
Mission Rectangle Door Set
|
 |
Arch Door Set
|
 |
Mission Arch Door Set
|
|
Steel Frame, Black
|
 |
Steel Frame, Hammered Pewter
|
 |
Firebox and Fireplace Bottom Trim Kit
|
|
Decorative Mission Louvers  Features
|
|
Decorative Arch Louvers
Features
|
 |
FRBC Battery Operated On or Off Remote Control
|
 |
FRBTC2 Battery Operated Thermostat Remote Control
|
|
|
FREC Electric On-Off Remote Control with Battery Transmitter
|
 |
FRBTPS Battery Operated Programmable Touch Screen Remote Control
|
 |
FWS1 Fireplace On/Off Switch
|
 |
TMV Wall Thermostat Reed Switch
|
 |
TRW Wall Thermostat Wireless Remote
|
Variable Remote (For Intermittent Pilot)
 |
Remote Kit for Natural Gas / Propane
|
Cabinet Mantels and Corner Cabinet Mantels with Bases
|
  |
Cabinet Mantels
|
