N550
The Nectre 550 Wood-fired Oven is a powerful radiant wood heater that can warm up to 2,500 sq.ft. of living area. With the added features of a huge baking oven and cooktop with removable rings to become a cooking burner.
The firebox body is built of 1/4" steel surrounded by a 1/8" steel outer casing to ensure efficient heat output, while the doors are made of durable and long-lasting cast iron.
The firebox itself is made of 1/4" steel, with 5/16" side sacrificial plates, hanging in position with no mechanical fixings.
Additional Features
Nectre 550 Wood-fired oven is finished in black metallic paint and comes with cast iron door with ceramic glass and stay cool spring handles. Steel baffle with steel brick retainer and firebrick lining to improve thermal mass. A 35'x35' (90cm x 90cm) hearth is required. Door aperture is 10" x 20" (25cm x 49.5cm). Total weight is 465 lbs. (220 kg).
Nectre Wood-fired Oven's are not supplied with a flue from the factory. We provide suitable a flue and or decromesh kits required for installation. Nectre heaters do not come with hearths, we can supply a suitable hearth for your requirements.
The Nectre oven's outer skin is the firebox, which means heat radiants objects around the fire. Radiant heat is excellent if you want to sit in front while watching the flame.
Freestanding dimensions
Top view dimensions
CORNER INSTALLATION with 900mm Flue Shield
STANDARD INSTALLATION with 900mm Flue Shield
Hot flue gases circulate around the oven box to provide excellent cooking temperatures to bake a loaf or succulent roast or a favourite stew. The gases are then expelled through the Flue outlet. The bypass damper allows the Oven to function as a excellent wood heater when cooking is not required.
| DuraBlack Pipe Telescoping Length With Trim - 6DBK-TL | |
 |
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. |
| DuraTech Round Ceiling Support Box - 6DT-RCS | |
 |
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. |
| DuraTech Chimney Pipe - 6DT-48 | |
 |
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Attic Insulation Shield - 6DT-IS | |
 |
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. |
| DuraTech Roof Flashing - 6DT-F6 | |
 |
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
 |
Required where pipe terminates above the roofline. |
| DuraTech Storm Collar - 5DT-SC | |
 |
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
| DuraBlack Pipe Telescoping Length With Trim - 6DBK-TL | |
|
Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. |
| DuraBlack 12" Length Single-Wall Black Pipe - 6DBK-12 | |
 |
Use for a single-wall connector pipe. Requires 18” clearance to combustibles. Subtract 1 1⁄4” from the length to calculate the installed length. |
| DuraTech Chimney Pipe - 6DT-48 and 6DT-24 | |
 |
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech 24" Square Ceiling Support Box - 6DT-CS24 | |
 |
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist lock. Suitable for both flat and cathedral (A-Frame) ceiling applications. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
| DVL Pipe Telescoping Length - 6DVL-68TA | |
 |
Use for a two-piece installation from stove to ceiling support box or finishing collar. |
| DVL Double-Wall Black Pipe - 6DVL-12 | |
 |
Designed for installation with minimum clearance to combustibles (6” to walls, 8” from top of horizontal run to ceiling). |
| DVL Adapter Section No Damper - 6DVL-AD | |
 |
Connects DVL pipe to the appliance flue outlet. Use as a stove adapter. |
| DuraTech Chimney Pipe - 6DT-48 and 6DT-24 | |
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech 24" Square Ceiling Support Box - 6DT-CS24 | |
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist lock. Suitable for both flat and cathedral (A-Frame) ceiling applications. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
| DVL Pipe Telescoping Length - 6DVL-68TA | |
|
|
Use for a two-piece installation from stove to ceiling support box or finishing collar. |
| DVL Adapter Section No Damper - 6DVL-AD | |
|
|
Connects DVL pipe to the appliance flue outlet. Use as a stove adapter. |
| DuraTech Round Ceiling Support Box - 6DT-RCS | |
|
|
Supports chimney pipe and provides a positive connection between support box and chimney with a built-in twist-lock. |
| DuraTech Chimney Pipe - 6DT-48 (2x) | |
|
for use with a 2100°F HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. |
| DuraTech Roof Flashing - 6DT-F6 | |
|
Use to weatherproof the penetration of chimney pipe through the roof. |
| DuraTech Chimney Cap - 6DT-VC | |
|
Required where pipe terminates above the roofline. |
| DuraTech Attic Insulation Shield - 6DT-IS | |
|
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over Firestop Radiation Shield or a support box. |
| DuraTech Storm Collar - 5DT-SC | |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500° F high-temperature sealant. |
We have only had the stove for about a month. There is a learning curve to it but we are truly enjoying it. It does heat our 2000 sq ft home great. Us fireplace store was great to work with. We received the stove quickly and always did their best to answer our questions.
United StatesThe stove is wonderful. The oven cooks evenly. Just wish it had a fan to circulate heat into the room. Shipping was quick from the company, but sat at the dock several days and no one ever called us to make arrangements. We had to inquire and get the company to ship it to us.
United StatesThis stove is massive. fits perfectly in my kitchen. I need to heat my house and may as well cook at the same time.. So far I have braised beef in the oven. I made potato leek soup, omelets and fried egg on the cook top. Managing temperature is a matter of draft and size of firewood, but, I am beginning to understand the dynamic. I am very pleased with the cooking. I was worried that the fire box barely holds 3 big logs for overnight burning. Each morning my house is warm and I have had hot coals in the firebox. I am hopeful that it will keep my house warm when the winter arrives. So far I think it will heat will and meet my needs, heating about 1800 sq ft through the coldest nights.
United StatesExcellent shopping experience & got cook wood stove delivered on time.
I have had an excellent experience with the staff at US Fireplace. They delivered my Nectre 550 quickly and work with me to resolve delivery challenges with the freight company. End result, I have my stove in place ready to install. I am very pleased.
