Empire Comfort Systems

VFSL30FP7010P

Empire 30" Boulevard SL Vent-Free Linear Gas Fireplace

3 reviews
Fuel Type: Propane Gas - LP
BTU Max/Min: 10000 BTU


Estimated Arrival: Between and . (To All Contiguous States)


✔ Same-Day Order Processing
✔ Free Returns
✔ No Restocking Fees
✔ Financing Options Available

Text or call 888-992-1556, start live chat, or email support@usfireplacestore.com with any questions. Our team is available to serve you 8:00 AM - 11:59 PM ET, 7 days a week.

This unique clean-burning fireplace features an elegant linear burner mounted between a matte-finished black full panel at the rear and a short tempered-glass deflector panel at the front.  Aided by multiple reflections through the glass in front, the Boulevard SL creates a high-definition contrast between the flames and the black panel.  With its clean lines and muted black finish, the Boulevard SL represents the last word in contemporary styling.

Every Boulevard SL includes an electronic intermittent ignition system that eliminates the standing pilot to help you save energy and money. The system includes a battery back-up switch to standing pilot to operate during power outages. The fireplace ships with an on/off wall switch to mount outside the fireplace. Upgrade to an optional wall thermostat, remote control thermostat, or even a programmable remote. Sized to fit in a stud wall, the Boulevard SL conceals its valve and control module below the burner. Openings in the casing let you route the gas supply from below, the side, or the back.

Shown with required decorative front (not included). 

Features:

  • Dimensions: 5.5" (D) x 30.25" (W) x 17.88" (H)
  • Includes: 
    • Non-combustible Board (for full or partially recessed installation
    • On-Off Wall Switch with 10-ft Extension Wire
    • Battery Backup with 10-ft Extension Wire
    • Fine Mesh Barrier Screen
  • Requires:
    • Decorative Front for Surface Mount or Partially Recessed installation
    • Non-combustible material (tile/stone) for Partially Recessed and Fully Recessed installation
    • Electrical box for Wall Switch
    • Electrical box and cover for Battery Back-Up
  • This fireplace installs:
    • Surface mounted on any wall(No Framing). Order a decorative front and wrap accessory (Does not require non-combustible materials.)
    • Partially recessed in a 2 x 4 framed wall(18 x 30-3/4 x 3-1/2 inches). Use the included non-combustible board (finished with tile or stone) and order a decorative front accessory
    • Fully recessed in a 2 x 6 framed wall(18 x 30-3/4 x 5-1/2 inches). Use the included non-combustible board and apply tile or stone over the face
  • Fuel Type: Liquid Propane or Natural Gas
  • Venting Type: Vent-Free
  • Ignition: Intermittent Pilot Ignition
  • Shape: Linear
  • Weight: 50 lbs
  • Assembly Required: Required
  • Color Family: Black
  • BTU Max/Min
    • 10,000 BTUs or less are required for a Bedroom Application
    • Bedroom units produce 10,000 BTUs
    • Standard application units produce 12,000 BTUs (LP) and 14,000 BTUs (NG)
  • Made in the USA

CA Residents: See Prop 65 WARNING.

Recessed Installation

At just 5 1/2 inches deep the Boulevard SL is the first vent-free fireplace that can install fully in a 2 x 6 stud-framed wall. Add tile right up to the rectangular opening to create a stunningly beautiful, amazingly efficient clean-face fireplace.  The optional trim kit finishes the opening and adjusts for different depths of tile or stone. Recessed installation requires installing the included non-combustible material above and to the sides of the fireplace, and tile or stone to the fireplace opening. The optional trim kit hides tile edges and adjusts from 1/2 to 1 inch.

Partially Recessed Installation

In a 2 x 4 framed wall, the Boulevard SL can install, partially in the wall and finish with one of two fronts. Partially recessed installation requires installing included non-combustible material above the fireplace, and a Mitered Decorative Front.

Surface-Mount Installation

With the available fireplace wrap, the Boulevard SL can be hung like a framed art on any wall – including brick, stone, or conventional drywall – and finished with a decorative front. Surface-Mount installation requires a Mitered Decorative Front and a Fireplace Cabinet Wrap (select both options for surface mount installation).

Narrow Trim is not required for the fully recessed installation, but helps dress out the fireplace opening. Adjusts from 1/2 to 1 inch depth

Warranty:

  • All vent-free products carry a five-year limited warranty with a five-year limited labor warranty.
  • All remote controls and lighting systems carry a one-year limited warranty.
  • Refer to Owner’s Manual for complete warranty info.

Downloads

Options & Accessories

Click to see Installation Options
  1. Surface Mount Requires Cabinet Wrap, Mitered Front, Black
  2. Partial Recess Requires Mitered Front, Black
  3. Full Recess requires Narrow Trim (Suggested but not required)
Mitered Front (required for surface-mount and partially-recessed installation)

Optional Trim Kit (for fully-recessed installation)

 

Click to see Control Options

 

FRBC-Remote, Battery Receiver and Remote, On/Off

 

This FRBC remote control system was developed to provide safe, reliable, and user-friendly remote control system for gas heating appliances. The system can be operated manually from the transmitter.

The transmitter operates on a 12V battery (included) and the remote receiver operates on 4 AA-size 1.5V batteries. The transmitter has ON and OFF functions that are activated by pressing either button on the face of the transmitter. When a button on the transmitter is pressed, a signal light on the transmitter illuminates briefly to verify that a signal has been sent. The system operates on one of 255 security codes that are programmed into the transmitter at the factory.

The remote receiver has a 3-position slide switch for selecting the MODE of operation: ON/REMOTE/OFF. The remote receiver can be either wall-mounted in a standard plastic switch box or placed on or near the fireplace hearth.

This kit includes: Transmitter and remote receiver


FRBTC-Remote, Battery Receiver and Remote, Thermostat

This FRBTC remote control system was developed to provide safe, reliable, and user-friendly remote control system for gas heating appliances. The system can be operated manually from the transmitter. This all battery system operates independently of household current. The system operates on radio frequencies with a non-directional signals. The FRBTC operating range is approximately 20 feet range. The system operates on one of 1,048,576 security codes that are programmed into the transmitter at the factory; the remote receiver’s code must be matched to that of the transmitter prior to initial use.

The transmitter operates on a (2) 1.5V AAA batteries (included) and the remote receiver operates on 4 AA-size 1.5V batteries.

The remote receiver has a 3-position slide switch for selecting the MODE of operation: ON/REMOTE/OFF. The remote receiver can be either wall-mounted in a standard plastic switch box or placed on or near the fireplace hearth.

This kit includes: Transmitter and remote receiver

KEY SETTINGS
• ON – Operates unit to on position, Manually ON.
• OFF – Operates unit to off position, Manually OFF.
• MODE – Changes unit from manual mode to thermo mode.
• SET – Sets temperature in thermo mode.

NOTE: The highest SET temperature is 990 Fahrenheit (320 Celsius) and the lowest temperature is (450 Fahrenheit (60 Celsius)

 

FRBTP-Remote, Battery Receiver and Remote, Programmable

 

This FRBTP remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliance. The system can be operated thermostatically or manually from the transmitter. The system operates on radio frequencies (RF) within a 20 feet range using non-directional signals. The system operates one of 1,048,576 security codes that are programmed into the transmitter at the factory;

The transmitter operates on a 2 AAA-size 1.5V batteries (included) and the remote receiver operates on 4 AA-size 1.5 ALKALINE batteries.

The remote receiver has a 3-position slide switch for selecting the MODE of operation: ON/REMOTE/OFF. The remote receiver can be either wall-mounted in a standard plastic switch box or placed on or near the fireplace hearth. Works with either a Millivolt (MV) or Electronic ignition (IP) valve.

FUNCTIONS

  • ON indicates the system is on, either manually, timed, thermostatically, or program
  • THERMO indicates the system will automatically cycle ON/OFF, depending on programmed set temperature.
  • OFF indicates the entire system is turned off.
  • Countdown timer
  • PROGRAM indicates the system will automatically cycle ON/OFF in the programmed mode depending on the 7 day/4 period program that is in memory.

This kit includes: Transmitter and remote receiver


TMV-Wall Thermostat - Reed Switch

 


    • Wall thermostat with reed switch for Empire remote-ready gas appliances
    • Mounts conveniently on wall


TRW-Wall Thermostat - Wireless

 

This TRW remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas heating appliances. The system can be operated thermostatically or manually from the transmitter. The system operates on radio frequencies (RF) within a 20’’range using non-directional signals. The system operates one of 1,048,576 security codes that are programmed into the transmitter at the factory; the remote receiver’s code must be matched to that of the transmitter prior to initial use.

The remote receiver has a 3-position slide switch for selecting the MODE of operation: ON/REMOTE/OFF.

  • With the slide switch in the ON position (toward the LEARN button), the system will remain on until the slide switch is placed in the OFF or REMOTE position.
  • With the slide switch in the REMOTE position (centered), the system will only operate if the remote receiver receives commands from the transmitter.
  • With the slide switch in the OFF position (away from the LEARN button), the system is off.

The wall/transmitter operates on (2) 3V Button Cell (Included) batteries which powers the LCD screen and powers the RF signal. The remote receiver operates on 4 AA-size 1.5V batteries.

Wireless wall thermostat works with any Millivolt or 24V heater or fireplace.

Customer Reviews
5.0 Based on 3 Reviews
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    08/11/2021
    Great Little Gas Fireplace Empire 30" Boulevard SL Vent-Free Linear

    Shipping was prompt and the unit was safely packed. Communication from the Fireplace Store was good. With the help of an experienced pro I got the gas line plumbed in. The written instructions were thorough and the steps in the instructions were clear. My installation was Partially Recessed with the Mitered Front. The quality of the unit itself is excellent and the mitered front is a work of art. The fireplace works great and the simple aesthetic fits nicely into our home.

    PC
    Paul C.
    United States United States
    04/11/2021
    Excellent product

    We are contractors and purchase these frequently for our customers. They work well, heat well, and look nice.

    JA
    Joe A.
    United States United States
    02/01/2021
    Great looking fireplace

    Haven’t had a chance to try it out

    JA
    Joe A.
    United States United States

    Search