SKU:102.0499.1200
Enervex RSHT 12" Axial Vane Chimney Fan
Enervex RSHT 12" Axial Vane Chimney Fan
Fan & Damper Control
Optional Equipment
-- Please Select --
ADC100 Fan & Damper Control
No, Thank You
Modulating Fan & Damper Controller
Optional Equipment
-- Please Select --
ADC150 Modulating Fan & Damper Controller
No, Thank You
Solid Fuel Fan Controller
Optional Equipment
-- Please Select --
EFC 211 Solid Fuel Fan Controller
No, Thank You
Proven Draft Switch
Optional Equipment
-- Please Select --
PDS Proven Draft Switch
No, Thank You
Fan Speed Control
Optional Equipment
-- Please Select --
5A Fan Speed Control
8A Fan Speed Control
15A Fan Speed Control
No, Thank You
Steel Chimney Adaptor
Optional Equipment
-- Please Select --
5" Steel Chimney Adaptor
6" Steel Chimney Adaptor
No, Thank You
Manual Fireplace Damper (used with FSC or EFC211)
Optional Equipment
-- Please Select --
8" Manual Fireplace Dampers
10" Manual Fireplace Dampers
12" Manual Fireplace Dampers
No, Thank You
Mechanical Fireplace Damper (used with ADC150 or ADC100)
Optional Equipment
-- Please Select --
24 Volts
120 Volts
No, Thank You
Couldn't load pickup availability
- Free Shipping on Orders Over $300
- Same-Day Order Processing
- Easy Monthly Installments Starting at 0% APR*
• Text or call 888-992-1556
• Email support@usfireplacestore.com
• Start a live chat
Our team is available to serve you 8:00 AM - 11:59 PM ET, 7 days a week.
The RSHT Fan is specifically designed for applications where efficient operation, low noise level, low energy consumption, variable speed and compact design are of utmost importance. It should be installed at the termination point of the chimney or stack section and can be mounted on masonry or metal chimneys. It is typically mounted in the vertical position, but may be sidewall vented as well.
The fan assures a negative pressure is maintained in the entire chimney or stack system. The fan discharges horizontally (vertically, if side-wall vented) at a high velocity.
The fan housing is hinged and the top can be opened for easy service and access to stack.
The RSHT is for use where flue gas temperatures do not exceed 1400°F (760°C) for intermittent operation and 1000°F (538°C) for continuous operation.
What's Included
- 2"x4" or 4"x4" Junction Box with Cover and Conduit
- Fiber Mat and Mounting Brackets
- Bird Screen
- 5 Amp FSC Fan Speed Control
Not Included (Sold Separately)
- ADC 100 Fan Control
- ADC 150 Modulating Control
- EFC 211 Fan Control
- PDS Proven Draft Switch
- SCA Steel Chimney Adaptor
- MFD-S Manual Fireplace Damper
- MFD Mechanical Fireplace Damper
Features
-
Material
- Housing is made of 3/16" stainless steel.
- Finished with one coat of black paint for added corrosion resistance.
-
Motor
- Split capacitor, totally enclosed.
- Class H insulated, IP54 Protection Class.
- Sealed ball bearings.
- Variable Speed.
- Thermal overload protection.
- Quiet Operation
- Variable-speed motor
- Use with solid-fuel-fired appliances
- Low operating costs
- 6-months Performance Guarantee
Specifications
| Item Number | 102.0499.1200 |
| Capacities | 0-575 CFM (0-975 m3/h) |
| Material | Stainless Steel Housing and Axial Vane |
| Discharge | Horizontal |
| Fan Type | Axial Vane |
| Motor Type | Totally enclosed, Variable speed, Class F |
| Voltage (VAC) | 1x20 V @ 60 Hz |
| Amperage | 1.33 |
| RPM | 1600 |
| CFM (@0.0 Ps) | 550 |
| Motor Output (hp / kW) | 0.13 / 0.10 |
| Weight (lbs / kg) | 33.5 / 15.2 |
| Temperature Rating (Interm.) | 1400ºF / 760ºC |
| Temperature Rating (Cont.) | 1000ºF / 538ºC |
| Listings |
|
Technical Drawings & Dimensions
Dimensions (in / mm)
| A | 12.8 / 325 |
| B x B | 14.3 / 364 |
| C | 13.5 / 344 |
| D | 3.3 / 85 |
| E | 11.0 / 280 |
Parts Diagram
| 1 | Junction Box | 8 |
Locking nut |
| 2 | Conduit/cord | 9 | Inlet |
| 3 | Motor | 10 | Axial vane |
| 4 | Motor housing | 11 | Hinges |
| 5 | Motor plate | 12 | Capacitor (Inside junction box) |
| 6 | Bird Screen | 13 | Cooling Wheel |
| 7 | Base Plate |
Warranty
 |
2-Year Factory Warranty We promise the original user that we will replace or repair as we may elect, any part or parts of the new RS Chimney Fan which are defective in material or workmanship without charge for parts and labor (not including labor for dismantling and installation, freight, etc.) during the first 2-years following the date of invoice. |
 |
10-Year Factory Warranty Against Corrosion Perforation We promise the original user that we will replace or repair as we may elect, any part or parts of the RS Chimney Fan which are |
Documents & Files
Frequently Asked Questions
Can the fan be recessed?Even though the fans offer a very compact and low profile, some customers wish to hide it from the view below. The fan may be recessed or hidden as long as the fan is allowed to vent properly. |
Can you run wire inside the flue?No. The temperature inside the flue can become extreme and cause the wire to melt, so you may not run the wire inside the flue. You may want to consult with your electrician. |
Do I have to remove the chimney fan every time I have my chimney cleaned?No. The top of the fan has hinges that allow the chimney sweep to easily access to the flue without removing the fan. |
Does the fan always have to be on, when I have a fire in the fireplace or stove?Yes, the fan needs to run in order to cool itself. You may, however, run it at a very low speed. |
Does the fan block my chimney?No, the fan offers no more resistance to your chimney than a chimney cap would do. |
Does the fan require its own electrical circuit?No, the fan only draws about 1 to 4 Amps (the same as a light bulb), depending on the size, and runs on 110V, which is standard in most homes. |
The fireplace spills due to negative pressure in the house. Won't the chimney fan add to the problem?Any exhaust fan (i.e. bathroom fans, kitchen hood, clothes dryer, etc.) will pull air out of the house. However, proper use of the fan speed control assures the chimney fan simply simulates the natural draft required for the fireplace to operate. Thus, the chimney fan will not exhaust more air than a well-functioning fireplace would have done. |
What are your warranties?The ENERVEX Chimney Fans are covered by extensive warranties: A 2-year factory warranty and a 10-year corrosion perforation warranty. |
What happens when you have a fire in the fireplace and a power failure occurs?You are likely to experience the same problems you had before the chimney fan was installed. The fan offers no more resistance than a chimney cap. Since other fans in your house – that may have aggravated your fireplace problem – are not functioning either, your fireplace may work fine without the use of the fan. |
What types of guarantees do you offer?ENERVEX offers a 6-Month Unconditional Money-Back Guarantee on our fans. If you are not happy with the fan, simply return it and we’ll refund your money – no questions asked. |
Will installing the chimney fan eliminate a constant down-draft and odor - even when the fireplace is not in use?Yes. If you run the fan continuously at a low setting, you will be able to reverse the down-draft and/or to eliminate odors from the flue. This will not affect the longevity of the fan and – since the fan uses very little power – it will use very little energy. |
What our customers are saying...
-
Researched and ordered my fireplace from US FIreplace Store. Pricing was a fair value however, the customer service was EXCELLENT! I had an issue with the direct vent venting. I called US Fireplace and the correct items were sent out the next day AND Janessa stayed on top of my return authorization and sent me the permissions and documents I needed to return the incorrect item and no cost to me, including return shipping. Overall, I am a very satisfied customer and my fireplace looks and operates flawlessly. I am glad that I selected US FIreplace to source my direct vent fireplace. Thank you for the great service.
Clay
Monteagle, TN
-
I had placed an order, through Lowe's Home Improvement, for an Electric Firebox: Revillusion RBF42. Ordered 1st part of January. Was told I would have it in 3 weeks. When checking to see is it came in, was told it was delayed to 3/15. Was then told is was delayed until 4/25. Waited until 4/27 to check on it. Was then told it was now delayed until August. This firebox was going in a new Sun Room addition. I could not get my final inspection until the Firebox was installed. I went on line and googled for this same product. US Fireplace Store web site was given to me. This was on a Saturday. I call and reached a very nice man. Explain what I was look for. He checked and told me they had 30 of them in stock. I almost fell out of my chair. I clarified with him the product I was wanting. I ask how soon could I get it. He told me it would ship today. Again, was amazed. It arrived on the following Monday. What a pleasure and a relief working with US Fireplace Store and their employees. Exceed my expectations.
Thomas W.
Fort Mill, SC
-
Great prices, quick delivery and fast hassle free services on the issue I encountered. I had purchased an electric fireplace unit that would not fit into the existing fireplace space. With one email I was able to get the wrong fireplace refunded and picked up at my home at no extra cost and the new one I purchased and delivered free of charge. Great company.
John P.
Denvers, MA
Chosen by over 25,000 households, builders, and businesses
Why US Fireplace Store
-
100,000+ Products
America's largest selection of hearth & heating products. Fireplaces, stoves, fire pits, heaters, log sets and more.
-
Easy Returns
Need to return the merchandise? We accept returns for 30 days from the date of delivery.
-
Live Chat Support
No chatbots. Speak with a human. Average response time is 48 seconds.
-
7 Days/Week Service
We're here to help on live chat, email & phone. 8:00 AM - 11:59 PM Eastern Time.
-
Pay Over Time
0% APR is available for 3 and 12- month financing.* See if you prequalify today.
-
Staff Picks
Check out the Staff Picks collection. See the top products selected by our team.