Rutland

95-6

Rutland Grapho-Glas® Stove Gasket Kit

Size and Type: 7' X 5/8" Flat


Estimated Arrival: Between and . (To All Contiguous States)


✔ Same-Day Order Processing
✔ Free Returns
✔ No Restocking Fees
✔ Financing Options Available

Text or call 888-992-1556, start live chat, or email support@usfireplacestore.com with any questions. Our team is available to serve you 8:00 AM - 11:59 PM ET, 7 days a week.

Overview

Using our Rutland Products you can Keep your Fire-Burning  Equipment operating at peak efficiency. Repair and maintain your fireplace, chimney, wood stove, or gas stove like the Rutland Grapho-Glas® Stove Gasket Kits.

RUTLAND Grapho-Glas® Stove Gasket Kits include both high-quality gasketing in convenient rope or tape, plus cement to allow the DIY homeowner to confidently replace worn-out gaskets in wood stoves, coal stoves, outdoor wood boilers, and fireplace inserts.

This graphite-impregnated gasketing resists abrasion, creosote adhesion, and temperatures up to 1000ºF, and is braided to resist fraying.

The kit also contains a 1.35 oz tube of RUTLAND E-Z Spread Fiberglass Stove Gasket Cement to securely attach the provided gasketing.

Standard Features

  • 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″ Rope in 7′ lengths or 5/8″ x 3/16″, 3/4″ x 1/4″ Tape in 7′ lengths
  • Made in the USA

WARNING: These products can expose you to chemicals including Soot, which is known to the State of California to cause cancer. For more information, go to CA Prop 65 Warning

Downloads

Directions

We recommend wearing protective gloves and eyewear. Working with a cold stove, remove all old gasketing and adhesive from the channel of your stove door or window. For the adhesive to adhere properly, you must clean to bare metal in the gasket channel. Lightly dampen the gasket and the gasket channel in the stove door.

Knead Tube Before Use. Cut tip on the angle. Apply a 1/8″ bead of cement into the gasket channel, then press the gasket firmly into the channel adhering to cement. Close the door to create a crease in the excess gasket. Open the door and trim the excess gasket at the crease. Leave the door open and allow it to air dry for one hour. Be sure to heat cure within 30 days.

Search