SKU:SPS20050N7
SunStar SPS Series Standard/Tough Guy Infrared Straight Tube Two Stage Heater - 200,000 BTU
SunStar SPS Series Standard/Tough Guy Infrared Straight Tube Two Stage Heater - 200,000 BTU
4" Vent Cap For Sidewall Or Roof Vent
-- Please Select --
SunStar 4" Vent Cap For Sidewall Or Roof Venting
No, Thank You
4" Combustion Air Termination Cap
-- Please Select --
SunStar 4" Combustion Air Termination Cap For Infrared Tube Heaters
No, Thank You
Exhaust Hood
-- Please Select --
SunStar Exhaust Hood for Straight & U Shaped Infrared Heaters
No, Thank You
Gas Supply Accessories
-- Please Select --
SunStar Gas Line Pressure Regulator Up To 2 PSIG for Infrared Heaters
SunStar Gas Line Pressure Regulator Above 2 PSIG for Infrared Heaters
SunStar 36" Flexible Gas Connector For Ceramic & Tube Heaters
No, Thank You
Thermostats Options
-- Please Select --
SunStar Two Stage Economy Thermostat for Infrared Patio Heaters
SunStar Two Stage High Humidity Thermostat
SunStar Two Stage Digital Thermostat for Infrared Patio Heaters
SunStar Two Stage Thermostat Relay Kit for Infrared Patio Heaters
No, Thank You
Chain Kit
-- Please Select --
SunStar 25' Chain Kit for Infrared Tube Heaters
No, Thank You
Manual Cutoff Valve
-- Please Select --
SunStar Manual Cutoff Valve For Infrared Tube Heaters
No, Thank You
End Reflector Kit
-- Please Select --
SunStar End Reflector Kit For SIS or SPS Infrared Heaters
No, Thank You
10' Deflector Kit
-- Please Select --
SunStar 10' Deflector Kit For Straight Infrared Tube Heaters
No, Thank You
Manual (On/Off) Toggle Switch
-- Please Select --
SunStar Manual (On/Off) Toggle Switch For Single Stage Heaters
No, Thank You
90° Elbow
-- Please Select --
SunStar 90° Elbow For Straight Infrared Tube Heaters
No, Thank You
60 Minute Auto Shut-Off Timer
-- Please Select --
SunStar 60 Minute Auto Shut-Off Timer
No, Thank You
- Free Shipping on Orders Over $300
- Same-Day Order Processing
- Easy Monthly Installments Starting at 0% APR*
• Text or call 888-992-1556
• Email support@usfireplacestore.com
• Start a live chat
Our team is available to serve you 8:00 AM - 11:59 PM ET, 7 days a week.
Whether you need to heat your warehouse, garage, or other hard-to-heat spaces, the SunStar SPS/U Series infrared heaters provide both the field efficiency of radiant heat and the installation flexibility you need.
SunStar infrared tube heaters are ideal for complete building heat or spot heating needs. The best applications are those where doors open and close frequently and in buildings where ceiling heights are above ten feet. The flexible SunStar infrared heating system can be designed to meet any commercial or industrial heating needs.
The minimum mounting heights are shown for human comfort and uniform energy distribution for complete building applications. Mount heaters as high as possible. CSA certified. This product has 5 year limited warranty on tubes and 1 year limited warranty on unit. This product is made in USA.
TISS™ Tube Integrity Safety Shut-Off System
SunStar’s patent pending innovative safety feature for positive pressure radiant tube heaters is called the “Tube Integrity Safety System” (TISS™).
In the unlikely event of a tube failure, TISS™ has been designed to automatically shut off the heater. The revolutionary TISS™ uses a simple principle to place an electrically insulated aluminum wire in tension above the reflector. Low voltage is then continuously passed along the wire in line with the gas control circuit. If heat levels increase due to heat exchanger failure, the wire melts and the safety circuit is broken, breaking the 24 volt circuit and shutting down the heater.
Note: Since straight tubes are always hotter at the burner end than at the exhaust end, always observe the minimum recommended mounting heights shown on the specification sheet for greatest human comfort. Use SIU series instead of SIS series for spot heating applications.
Features:
- Heavy duty cast iron burner
- Maintenance-free operation
- Enclosed combustion chamber
- 100% gas shut-off safety control
- 5 year limited warranty on all tubes
- 30 second pre-purge before ignition
- Highly efficient aluminum reflectors
- Heavy duty permanently lubricated ball bearing
- Individual reflectors can rotate up to 45 degrees
- 30 second post-purge after thermostat is satisfied
- Suitable for horizontal or angle mounting up to 45 degrees
Push Through System
- Products of combustion are pushed through the combustion chamber
- No draft hoods, totally enclosed combustion chamber
- Blower motor totally enclosed in the burner box. Ideal for applications where minimal noise (less than 60 dB) is desired.
- Heavy duty permanently lubricated ball bearing, totally enclosed motor for maintenance-free operation
- 30 second pre-purge before ignition and 30 second post-purge after thermostat is satisfied
- Diaphragm air switch for proof of venting before gas flow and ignition
Gas Shut-Off Safety Control
- Burner inspection sight glass
- Step-opening redundant combination gas valve for quite ignition and added safety
- Inside or outside air for combustion
- Up to 25 ft. outside combustion air capability
- Standard outside combustion air intake
- Diagnostic Monitoring Light System
Radiant Emitter Tube System
- 4” O.D. heat treated aluminized steel combustion chamber (10’ length)
- Standard highly emissive radiant tubes (10’ lengths)
- Optional aluminized steel radiant tubes (Tough Guy Option)
- 5 year limited warranty on all tubes
- Suitable for horizontal or angle mounting up to 45°
- Up to 25 feet sidewall vent capability
Burner System
- Heavy duty cast iron burner
- Reliable direct spark ignition systems and 100% gas shut-off safety control
- Burner inspection sight glass
- Step-opening redundant combination gas valve for quiet ignition and added safety
- Inside or outside air for combustion
- Up to 25 ft. outside combustion air capability
- Standard outside combustion air intake
- Diagnostic Monitoring Light System
Reflector System
- Highly efficient aluminum reflectors
- Individual reflectors can be rotated up to 45° to direct heat where needed
- Optional end, corner, U-bend and side extension reflectors
Applications:
- Manufacturing Plants
- Warehouses
- Auto Dealerships
- Aircraft Hangars
- Loading Docks
- Weld Shops
- Car Washes
- Fire Stations
- Greenhouses
- Gymnasiums
- Garages
- Machine Shops
- Tennis Courts
- Swimming Pools
- Maintenance Shops
- Farm Buildings
- Truck Service Areas
- Auto Body Shops
Specifications:
Fuel Type | Natural Gas / Propane Gas |
---|---|
Material | Cast Iron/Aluminum |
Color | Stainless Steel |
Dimensions |
|
Weight |
190.4 lbs |
BTU Ratings (BTU/hr) | 200,000 (LP/NG) |
Ignition Type | Direct Spark Ignition |
Volts | 120 AC 60Hz |
Supply Pressure |
|
Burner Pressure |
|
Warranty |
|
SPS Clearances to Combustibles:
Side | Ceiling* | Below | End | (45°) Front | (45°) Rear |
---|---|---|---|---|---|
42" | 6" | 93" ** | 20" | 80" | 12" |
*Note: "When used indirect vented, minimum clearance for Ceiling must be 18 inches".
*Also Note: "Maximum clearance below reduces by 50% once you are 25 ft. downstream from the control box."
Please check Product Manual for more Information...
Dimensions:
Bottom View | |
End View |
Downloads:
- Download Installation and Owner's Manual
-
Download Specs Sheet
- Download Pull Vs Push Thru Reference Chart
-
Download SunStar Tube Heaters Accessories
CA Residents: See Prop 65 WARNING.
Options & Accessories
Click to see 4" Vent Cap For Sidewall Or Roof Venting
This 4" vent cap is used for sidewall venting or through-the-roof venting. It can be used with all infrared tube heaters. This product has a limited warranty of 1 Year. This product is made in USA. |
Click to see 4" Combustion Air Termination Cap
This 4" cap. is used for combustion air or fresh air duct termination. It can be used with all infrared tube heaters. This product has limited warranty of 1 year. This product is made in USA. |
Click to see Exhaust Hood
This Exhaust Hood is for use with all straight and U-Shaped infrared tube heaters. Intended for inside indirect vented use. This product has a limited warranty of 1 Year. This product is made in USA. |
Click to see Gas Supply Accessories
Gas Line Pressure Regulator Up To 2 PSIG This Regulator is for use with all Tube Heaters between 1/2 and 2 psig. The maximum supply pressure to the infrared heaters is 14" WC or 1/2 psig. If your supply pressure is between 1/2 psig and 2 psig then you will need this second stage regulator. The regulator is equipped with vent limiting device and complies with ANSI standards. The regulator does not need any venting. This product has limited warranty of 1 year. This product is made in USA. |
|
Gas Line Pressure Regulator Above 2 PSIG This Regulator is for use with all Tube Heaters between 2 and 10 psig. The maximum supply pressure to the infrared heaters is 14 " WC or 1/2 psig. If your supply pressure is above 2 psig and less than 10 psig then you will need this second stage regulator. The regulator requires venting outside the building to comply with local codes. This product has limited warranty of 1 year. This product is made in USA. |
|
36" Flexible Gas Connector This 36" flexible gas connector is For use with all ceramic heaters. Features long-lasting stainless steel construction. This product has limited warranty of 1 year. This product is made in USA. |
Click to see Thermostat Options
Two Stage Economy Thermostat Two Stage Economy Thermostat for indoor applications. 24V, temperature range 50° to 90°F (∓4°F differential). Up to 85 operating humidity range (%RH). Manual changeover |
|
Two Stage High Humidity Thermostat This Two Stage High Humidity Thermostat is 24V operation for use with all two stage Infrared Tube Heaters. This product has limited warranty of 1 year. This product is made in USA. |
|
Two Stage Digital Thermostat Two Stage Digital Setback Thermostat for indoor applications. 7 - day programmable digital 24V thermostat, temperature range 40° to 90°F (∓1°F differential). Up to 85 operating humidity range (%RH). Automatic changeover |
|
Two Stage Thermostat Relay Kit Two Stage Relay Kit for controlling multiple heaters with a single 3 position switch or single 24V Two Stage thermostat. Waterproof ABS Construction. Up to 85 operating humidity range (%RH). |
Click to see Chain Kit
This chain kit is used to hang heaters from the ceiling. It includes 25' of chain and 12 S-hooks. It can be used with all infrared tube heaters.
|
Click to see Manual Cutoff Valve
This Manual Cutoff Valve is for use with All Infrared Tube Heaters. Ball valve with 1/2" NPT female thread.
|
Click to see End Reflector Kit
This optional End Reflector Kit is designed to cover both ends of the tubes to increase radiant output. Helps to minimize convection losses and increase tube temperatures. Recommended for use when the heaters are angle mounted or when overall system efficiency improvements are needed.
|
Click to see Deflector Kit
This Deflector Kit diffuses the radiation on the first 10' of the tube heater and reduces the clearance to combustibles below. The deflector is 10' long and ships in two separated 5' sections.
|
Click to see Manual (On/Off) Toggle Switch
The SunStar Manual (On/Off) Toggle Switch is designed for manual heater control of single stage heaters.
|
Click to see 60 Minute Auto Shut-Off Timer
The 60 minute Auto Shut-off timer is specifically designed for SunStar heaters. it's Safety feature shuts off your heater after an hour.
|
Click to see 90° Elbow
The 90 degree elbows are used for all straight infrared tube heaters. The corner reflector can be added to reduce the clearance to combustibles above the heater.
|
What our customers are saying...
-
Researched and ordered my fireplace from US FIreplace Store. Pricing was a fair value however, the customer service was EXCELLENT! I had an issue with the direct vent venting. I called US Fireplace and the correct items were sent out the next day AND Janessa stayed on top of my return authorization and sent me the permissions and documents I needed to return the incorrect item and no cost to me, including return shipping. Overall, I am a very satisfied customer and my fireplace looks and operates flawlessly. I am glad that I selected US FIreplace to source my direct vent fireplace. Thank you for the great service.
Clay
Monteagle, TN
-
I had placed an order, through Lowe's Home Improvement, for an Electric Firebox: Revillusion RBF42. Ordered 1st part of January. Was told I would have it in 3 weeks. When checking to see is it came in, was told it was delayed to 3/15. Was then told is was delayed until 4/25. Waited until 4/27 to check on it. Was then told it was now delayed until August. This firebox was going in a new Sun Room addition. I could not get my final inspection until the Firebox was installed. I went on line and googled for this same product. US Fireplace Store web site was given to me. This was on a Saturday. I call and reached a very nice man. Explain what I was look for. He checked and told me they had 30 of them in stock. I almost fell out of my chair. I clarified with him the product I was wanting. I ask how soon could I get it. He told me it would ship today. Again, was amazed. It arrived on the following Monday. What a pleasure and a relief working with US Fireplace Store and their employees. Exceed my expectations.
Thomas W.
Fort Mill, SC
-
Great prices, quick delivery and fast hassle free services on the issue I encountered. I had purchased an electric fireplace unit that would not fit into the existing fireplace space. With one email I was able to get the wrong fireplace refunded and picked up at my home at no extra cost and the new one I purchased and delivered free of charge. Great company.
John P.
Denvers, MA
Chosen by over 25,000 households, builders, and businesses
Why US Fireplace Store
-
100,000+ Products
America's largest selection of hearth & heating products. Fireplaces, stoves, fire pits, heaters, log sets and more.
-
Easy Returns
Need to return the merchandise? We accept returns for 30 days from the date of delivery.
-
Live Chat Support
No chatbots. Speak with a human. Average response time is 48 seconds.
-
7 Days/Week Service
We're here to help on live chat, email & phone. 8:00 AM - 11:59 PM Eastern Time.
-
Pay Over Time
0% APR is available for 3 and 12- month financing.* See if you prequalify today.
-
Staff Picks
Check out the Staff Picks collection. See the top products selected by our team.